Golden-brown crust on a bone-in ribeye in the PitmasterX cast iron skillet.

How to Get a Great Steak Crust in a Cast Iron Skillet

Roel Westra
Golden-brown crust on a bone-in ribeye in the PitmasterX cast iron skillet.
The goal: a browned crust across the steak’s surface, built in our hand-polished cast iron skillet.

That first sizzle sounds promising. The real test comes when you turn the steak over. For this cook, I used a thick, bone-in ribeye, the PitmasterX hand-polished cast iron skillet and the Napoleon Phantom Prestige 500 to build a golden-brown crust while keeping the centre juicy.

The pan used in this video

PitmasterX Hand Polished 12" Cast Iron Skillet

PitmasterX Hand Polished 12-inch Cast Iron Skillet

A smooth, hand-polished cooking surface with the heat retention of cast iron. This is the skillet I use to build the ribeye’s crust and finish it with lemon pepper butter. It is also made for frying, roasting and baking, in the kitchen or outdoors.

Shop the hand-polished skillet

Why steak thickness and pan contact matter

The steak in this video is an Irish grass-fed, bone-in ribeye with visible marbling. I choose a cut around three fingers thick. That thickness gives me time to work on the exterior before the centre reaches my chosen temperature.

Shape matters too. I trim the steak and tie it around the bone and meat, using enough tension to hold its shape without squeezing it tightly. A steak that sits neatly in the pan is easier to manage and turn. The objective is useful contact between the meat and the cooking surface.

Roel ties a thick bone-in ribeye before searing it in cast iron.
Trussing holds the bone-in ribeye in a more manageable shape for the pan.

Salt timing is a preference; a dry surface is the priority here

In the video, I explain why I prefer salting this steak about four hours ahead of cooking. That reflects the flavour I want from this particular cut. Just before searing, I pat the outside dry with paper towel. A wet exterior has moisture to lose before it can develop the crust we are looking for.

What the hand-polished cast iron skillet brings to the cook

The PitmasterX Hand Polished 12" Cast Iron Skillet combines a broad cooking surface with the heat stored in a substantial cast iron pan. That stored heat is useful twice: when the steak first goes in and when I turn the burner off near the end.

Roel shows the smooth, hand-polished cooking surface of the PitmasterX skillet.
The hand-polished cooking surface of a new PitmasterX skillet, shown in the video.

I show both a new pan and one I have been using. The new pan has a bright, polished finish; the used pan has a darker surface. The polished finish is a defining part of the pan, while proper seasoning and care help its natural release develop with use.

The first flip shows what I want in practice: the ribeye releases from the surface with its crust intact. The pan, preheating, oil and the time allowed for the crust to form all contribute to that moment.

For someone who enjoys this kind of cooking, its appeal extends beyond steak. The same skillet can move between stovetop, oven and barbecue for frying, roasting and baking.

Explore the PitmasterX skillet

The Napoleon Phantom Prestige 500 setup

The barbecue used is the Napoleon Phantom Prestige 500. For this cook I use its infrared SIZZLE ZONE side burner to heat the skillet, bringing the steak-searing setup outdoors.

Roel beside the Napoleon Phantom Prestige 500 barbecue used in the video.
The Napoleon Phantom Prestige 500 is the outdoor cooking station used for this steak.

In the video, I reduce the burner to medium before allowing the pan to warm up gradually. That detail matters: the aim is a properly preheated pan that I can control throughout the cook.

The side burner supplies the heat, the skillet provides continuous contact with the steak, and the thermometer tells me what is happening inside. Each has a different role.

The first flip reveals whether the crust is working

I use sunflower oil for the initial sear and leave the steak in contact with the pan. At the first flip, after about three minutes, there is already a substantial golden-brown crust. In the recap, I describe giving the second side about three minutes too, before following the core temperature more closely.

The first flip reveals the browned crust on the bone-in ribeye.
The first flip: the browned surface releases from the pan with the crust intact.

Those timings describe this steak and setup. Thickness, starting temperature and the heat in the pan influence how quickly another steak will cook. Watch the surface and the thermometer together: a browned exterior tells you about the crust, while the probe tells you about the centre.

Why I turn the burner off before the steak is finished

Cast iron keeps delivering heat after the flame is switched off. In this cook, that lets me move from building the crust to a more controlled finish with butter.

The temperature decisions in this video

42°C: I switch off the side burner, remove excess oil and fat, and add the lemon pepper herb butter.

50°C: I take the steak out of the pan and give it a ten-minute rest on the board.

52°C: this is my chosen final core-temperature target for the ribeye.

These are three different decisions in the same cook. The crust is already there when I turn off the burner. The hot skillet and burner retain enough heat to continue cooking, so I keep watching the probe instead of treating “flame off” as “cooking stopped.”

Lemon pepper herb butter melts over the seared ribeye in the cast iron skillet.
The lemon pepper herb butter goes in during the residual-heat finish.

Butter finishes the flavour after the sear

Lemon zest, garlic, sage and parsley bring freshness and aroma to the butter. Adding it during the gentler finishing stage coats the steak after the crust has formed. It is the final layer of flavour in this cook.

The result: crust you can hear

Sliced ribeye reveals a pink centre beneath the browned crust.
The sliced ribeye after resting: browned edges around the pink centre.

At the tasting, the crunch is what stands out first. The crust has texture, the centre is juicy and the lemon pepper butter adds another layer of flavour. My takeaway is the relationship between the stages: prepare the surface, let the crust develop, then manage the remaining heat.

Equipment and shopping links

Main sponsor · barbecue used

Napoleon Phantom Prestige 500

The infrared SIZZLE ZONE side burner heats the cast iron skillet in this video. Explore the barbecue’s features on Napoleon’s official product page.

View the Phantom Prestige 500 at Napoleon

PitmasterX · skillet used

Hand Polished 12" Cast Iron Skillet

Choose the pan featured in the cook: a smooth, hand-polished surface and the heat retention that makes the sear and residual-heat finish possible.

Get the skillet used in this video

Thermometer partner · shopping recommendation

ChefsTemp ProTemp 2 Plus

Following the core temperature is central to the technique. For a wireless monitoring option, explore the ChefsTemp ProTemp 2 Plus and its probe configurations.

Save 25% with code PITMASTERX
Enter the code at ChefsTemp checkout; the current offer terms apply.

Shop the ChefsTemp ProTemp 2 Plus

Watch the full steak-crust video

Steak-crust questions

Why does a thick steak help when building a crust?

A thick cut gives the exterior more time in the pan before the centre reaches the chosen temperature. Roel uses a bone-in ribeye around three fingers thick in this video.

What is different about the hand-polished skillet?

Its cooking surface is polished smooth. It combines that finish with the heat retention of cast iron; proper seasoning and care help its natural release develop over time.

Which Napoleon barbecue is used?

The Napoleon Phantom Prestige 500. Its infrared SIZZLE ZONE side burner heats the skillet during the searing stage.

Why add the butter after switching off the burner?

The initial sear has already built the crust. The stored heat in the skillet then melts the herb butter and continues the cook while Roel monitors the core temperature.

Retour au blog