Roel looking at the camera beside the ChefsTemp ProTemp 2 Plus stand and wireless probe

ChefsTemp ProTemp 2 Plus Unboxing: A First Look

Roel Westra

Made possible by

What actually comes in the box with the ChefsTemp ProTemp 2 Plus? Join me at the workbench in the BBQ barn for a closer look at the stand, wireless probe and the small accessories that make the setup easier to use.

This is an unboxing and first look. I unpack a fresh unit, show the charging positions, examine the probe and switch on the display. There is no cooking or accuracy test in this video.

PitmasterX × ChefsTemp

Save 25% with PITMASTERX

ChefsTemp is offering PitmasterX viewers an exclusive 25% discount. Use code PITMASTERX at checkout. Offer valid through December 31, 2026.

Explore the ProTemp 2 Plus

This content is sponsored by ChefsTemp. Offer subject to the current promotion and checkout terms.

Roel looking at the camera beside the ChefsTemp ProTemp 2 Plus stand and wireless probe
Roel with the ProTemp 2 Plus stand and wireless probe in the PitmasterX BBQ barn.

Inside this ProTemp 2 Plus box

I start with the help leaflet and instruction manual. The probe diagram deserves a proper look: it shows where the food and ambient measurements happen, and where the insertion mark sits. That is useful information before your first cook.

The package in this unboxing contains the display stand, one wireless probe, a charging cable, numbered markers and coloured identification rings. The colours help you recognise the individual probes in the app. Other bundles may contain more probes, so check the option you select.

At the front of the stand is the main probe charging position. Open the rear cover and you find two additional positions. That leaves room to expand the setup without changing the stand.

Instruction manual and ProTemp 2 Plus stand inside the orange box
The instruction manual explains the probe layout and minimum insertion point.

A closer look at the wireless probe

With the packaging removed, I can show the thin probe properly. There is a marked minimum insertion point, a section that goes into the meat and an exposed end that measures the surrounding cooking temperature. Those two readings answer different questions: how the food is progressing, and what is happening around it.

The slim shape is what catches my attention at the workbench. I also show the contact points that meet the charging stand. A secure fit matters when putting it away for its next use.

Roel showing the wireless probe and its ambient sensor
A closer look at the wireless probe before fitting it into the stand.

Charging, the screen and the app

I place the probe in its front slot and turn on the stand. The screen lights up, and I point out the channel button used to cycle through probes. The display also dims after a while. Celsius and Fahrenheit are available.

There are separate power input and output connections. Alongside charging the stand, I show how its output can be used to supply another device, such as a phone. The app is part of the wider setup, although this unboxing does not include a complete pairing walkthrough.

ProTemp 2 Plus stand switched on with the probe in its front charging slot
Switching on the stand with the probe resting in the front charging position.

What ChefsTemp adds to the picture

The following figures come from ChefsTemp’s product information; they were not measured in this unboxing.

Feature Manufacturer specification
Probe diameter 4.55 mm
Sensors Five internal sensors and one ambient sensor
Stated accuracy ±0.5°C / ±0.9°F
Capacity Up to three probes per stand
Connectivity Bluetooth and 2.4 GHz Wi-Fi
Stand battery 10,000 mAh rechargeable battery
Probe runtime Up to 30 hours per charge
Protection ratings IP55 stand; IP68 probe

ChefsTemp also lists compatibility with its optional Breezo fan for airflow control. The fan is a separate accessory and is not unpacked here.

Useful questions before the first cook

Can I check temperatures away from the BBQ?

The stand displays readings locally; the app adds targets and alerts. For remote viewing, set up the stand on 2.4 GHz Wi-Fi and keep it close enough to receive the probe signal. Internet access is still required for remote monitoring.

Does the high-heat rating apply to the whole probe?

No. The manufacturer’s 1000°F ambient rating concerns the exposed ambient end. The inserted part has a much lower limit. Insert past the safety mark and follow the instructions supplied with your exact probe; keep the stand away from hot surfaces.

How should I clean and store it?

Let the probe cool, hand-wash it and dry it before charging. Clean the stand with a damp cloth and keep it out of water. Store the equipment somewhere dry; the protection ratings do not replace the cleaning instructions.

How long does the stand run?

Its capacity is listed above. ChefsTemp’s published runtime figures vary between sections of its website and manual, so I would not promise one fixed duration from this unboxing. Charge before a long cook and check the battery indication.

My first-look takeaway

This session is about getting familiar with the hardware: what you receive, where the probe charges, how you identify additional probes and which controls are on the stand. Those are the details I want to understand before taking a new unit to the grill.

For another part of the ChefsTemp range, take a look at our ProTemp S1 unboxing. And let me know which piece of BBQ gear you want me to open next—the barn still has plenty of boxes waiting.

Watch the unboxing

  1. 00:00 — ChefsTemp ProTemp 2 Plus unboxing
  2. 00:16 — Manual and probe placement
  3. 00:47 — The stand and charging positions
  4. 01:10 — Charging cable, markers and coloured rings
  5. 01:50 — A closer look at the wireless probe
  6. 02:26 — Charging the probe and switching on
  7. 02:43 — App connection and probe channels
  8. 03:06 — Display settings and USB power connections
  9. 03:34 — Final thoughts and what to unbox next

Additional product information: official ProTemp 2 Plus page and ChefsTemp user manual. Checked 17 November 2026.

Roel Westra — PitmasterX

BBQ gear, outdoor cooking and hands-on unboxings from the PitmasterX barn.

Takaisin blogiin