How to Make Pulled Pork: Bark, Wrapping and Juicy Meat
Roel WestraGreat pulled pork needs more than enough time to fall apart. In this Borniak BBQ 150 cook, Roel builds a dark bark first, wraps the pork when that surface is ready, then keeps the cooking juices to mix back through the meat.
Smoke for colour, wrap to catch the juices, and finish for tenderness. In this cook, the smoker starts at 140°C, drops to 100°C overnight, and the pork finishes at around 98°C in the core. The four-hour bark stage is an example from this cook, not a universal wrapping time.
Ready to turn the pork into lunch? Go to the pulled pork croissant recipe with apple coleslaw and homemade BBQ sauce.
Start with a cut suited to pulling
The joint in this video is a fresh, bone-in pork leg, or fresh ham, weighing about 5 kg / 11 lb. It is raw pork for cooking, rather than a cured or ready-to-eat ham. For a smaller cook, Roel recommends pork neck, with its intramuscular fat.
The size and shape of the cut affect how long it takes to cook. A large bone-in joint needs a generous time allowance; it should not be treated like a smaller boneless neck just because both can become pulled pork.

Remove the remaining skin to expose more surface
Roel trims off the patch of skin left on the joint. That exposes more meat for seasoning and more surface on which to form bark. Inspect the whole joint before seasoning so there are no unseasoned faces hidden against the board.
Build flavour and bark before wrapping
Season for the whole piece of meat. Roel uses PitmasterX Texas Seasoning as the main flavour base and also uses PitmasterX Pork Seasoning in the cook. Cover the exposed surfaces generously and evenly; the video does not give a measured rub quantity for the 5 kg joint.

Set up the Borniak and the temperature probe
Bring the Borniak BBQ 150 to 140°C. Insert the ChefsTemp ProTemp 2 Plus probe into the centre of the meat, keeping its sensing tip away from the bone. Place the pork in the smoker, switch on the smoke generator and check that the top vent is open.
In the spoken explanation, Roel describes using an apple-and-beech wood-chip blend. The blend ratio is not specified. Use chips suited to the smoke generator rather than loading it with larger smoking chunks.

Judge the bark by its colour
After about four hours, the outside has the rich, dark colour Roel wants. That is his cue to move on. The centre can still be far from the finishing temperature when the outside is ready to wrap.

Different smokers can reach that colour sooner or later. Use the photograph and the meat in front of you as the guide: leaving the joint exposed simply to reach a fixed time can darken the bark further than intended.
Wrap when the bark is ready, and catch the drippings
Lift the pork into a large roasting tray and cover it tightly with aluminium foil. The tray catches the rendered fat and meat juices during the covered part of the cook. Return the covered tray to the smoker.

Wrapping changes the focus of the cook. The smoky exterior is already established; now the job is to make the interior tender while retaining the liquid you will use when pulling. Do not discard that liquid when you uncover the tray.
Allow room in your schedule
Roel explains that a large 5 kg bone-in joint can take 16–18 hours. That is a planning range, not a measured finishing time promised for every joint. Cut, size, smoker and the overnight adjustment all affect the result.
Finish slowly, then put the juices back into the pork
As evening approaches, Roel reduces the smoker from 140°C to 100°C to slow the covered cook through the night. He continues to track the core temperature and checks the pork again in the morning. If it still needs cooking, he allows more time and adjusts the smoker as necessary.
His finishing reference is around 98°C in the core, together with meat that separates easily. Use the thermometer to follow progress and the texture to confirm the pulling stage: the pork should yield rather than require force to tear apart.

Mix the bark, meat and captured liquid together
Remove the probe and bones before serving. Pull the meat apart in the tray, distribute the bark through it, and mix in the retained cooking juices. This is the step that carries the flavour from the tray back into the finished pulled pork.
In this filmed cook, Roel pulls the pork after uncovering it, without a separate timed resting stage. The important finishing detail shown here is keeping and redistributing the captured liquid.
Check tenderness in more than one area. If the strands still resist, continue the covered cook and check again. A completed timetable alone does not mean the joint has reached the texture shown in the video.
Turn the pulled pork into a croissant
A buttery croissant, crunchy apple coleslaw and a tangy BBQ sauce give the smoky pork a fresh contrast. The coleslaw needs three to four hours in the refrigerator, so prepare it while the pork cooks.
Make the pulled pork croissant
The separate recipe contains the complete sauce and slaw quantities, assembly instructions and serving amounts.
Equipment used in this cook
These are the smoker and thermometer used for the long cook.
Borniak BBQ 150
The cabinet smoker holds the large pork joint while the wood-chip smoke generator supplies the smoke. Roel starts at 140°C, then reduces the cooking temperature to 100°C for the overnight stage. The separate smoke and heat controls let him change the cooking pace after the bark has formed.
View the Borniak BBQ 150 at BorniakChefsTemp ProTemp 2 Plus
A wireless probe follows the pork’s internal temperature while it cooks. Use the reading to track progress towards Roel’s target of around 98°C, then check that the meat pulls apart easily. The temperature reading and the texture answer different parts of the same question.
Use code PITMASTERX for 25% off in the ChefsTemp shop.
Shop the ChefsTemp ProTemp 2 PlusYou will also need a large roasting tray, aluminium foil and heatproof gloves for the pork. For the slaw and sauce, use a knife or food processor, a large mixing bowl and a bowl or squeeze bottle for the sauce.
Borniak and ChefsTemp support PitmasterX. Their product links above are partner links.
Watch the original PitmasterX video
Watch the pulled pork and croissant video on YouTube
Video chapters
- 0:20 — The pulled pork cook
- 1:16 — Choosing the pork
- 2:21 — Trimming for more bark
- 2:38 — Seasoning the whole joint
- 3:00 — Wireless temperature probe
- 3:12 — Borniak smoker setup
- 3:45 — Preparing the coleslaw
- 4:56 — Adding apple
- 5:12 — Vinegar, sugar and chilling
- 5:35 — Homemade BBQ sauce
- 6:09 — Checking the bark
- 6:53 — Catching the drippings and wrapping
- 7:39 — Cooking by colour and tenderness
- 8:31 — Adjusting for the overnight stage
- 9:37 — Uncovering and pulling the pork
- 10:14 — Using the saved juices
- 11:02 — Building the croissant
