Why I Smoke Pork Ribs One Bone at a Time
Roel WestraCutting a rack into individual ribs before cooking changes how much surface you can season and smoke. In this Napoleon kettle cook, I start with a generously meaty pork rack, wrap each rib separately and finish with a thin, tangy glaze.

Choose a rack with enough meat
This technique starts at the butcher’s counter. The rack in the video carries a generous layer of belly meat and fat above the bones. Once it is divided, each rib has enough substance to cook as its own portion.
I trim the cartilage end and select the meatier first section of the rack, using six bones for this cook. Save usable trimmings for another dish. A thin, closely trimmed rack will behave differently, so look at the meat around each bone before deciding to separate it.

More exposed sides for the seasoning
Separating the ribs opens up surfaces that would stay inside a whole rack. I brush on a light layer of soy sauce as a binder, then apply Pork Seasoning to the sides as well as the top. The coating should be even, without burying the meat.
The Napoleon kettle is arranged for indirect cooking with coconut briquettes and two pieces of whiskey-barrel smoking wood. The ribs sit away from direct heat so their colour can develop steadily.
Use the first alarm as a checkpoint
The ChefsTemp S2 ProTemp is set to alert at 70°C / 158°F during the first stage. I use that cue to inspect the ribs and their exterior. In this cook, the smoke stage takes around two hours. Colour and surface condition matter alongside the reading.
Once the ribs look ready, each one gets its own tight foil parcel. I do not add butter or sugar inside these wraps. These meaty ribs already bring fat, and the sauce will supply the final sweet-and-tangy layer.

Finish by feel
The wrapped stage takes about another hour and a half in the video. A 92°C / 198°F alert prompts the next check, with a finishing range around 96°C / 205°F discussed during the cook. Those readings describe this batch; they do not guarantee tenderness or a fixed amount of carryover.
Check the meat between the bones with the probe and judge its resistance. Individual ribs can finish at slightly different times, which is one of the advantages of separate parcels. Handle them carefully when opening the hot foil and juices.

Keep the glaze thin
The sauce brings together ketchup, brown sugar, rice wine vinegar, ketjap manis, ginger syrup and Pork Seasoning. Warm it just enough to dissolve the sugar and combine the ingredients, then taste for balance. The vinegar is there to cut through the rich pork.
Brush a thin coat over the ribs so the smoked surface still shows. In the video they get a short warm rest of about ten minutes before serving. The aim is a glossy finish and a bite that still tastes of pork, smoke and seasoning.
What the single-rib method changes
You gain more seasoned surface and the ability to check and handle each portion separately. The work increases too: there are more sides to coat and more parcels to wrap. For thick, meaty ribs that deserve individual attention, that trade-off makes sense.
The important starting point is the cut itself. Generous meat above the bone gives this method room to work; simply separating a very thin rack will not recreate the ribs shown here.
Equipment
- Napoleon kettle grill.
- ChefsTemp S2 ProTemp.
- Coconut briquettes, smoking wood, foil, a heatproof saucepan and a basting brush.
Use code PITMASTERX for 25% off at ChefsTemp.
Watch the video
In this video
- 00:00 — Intro: How to Make Ribs Taste Better
- 00:42 — The Butcher’s Secret: Ribs from Pork Belly
- 02:05 — Maximizing Flavor: The Single-Rib Technique
- 02:26 — The Binder: Using Soy Sauce for Color & Salt
- 03:07 — Grill Setup: Briquettes & Whiskey Barrel Smoke
- 03:59 — Phase 1: Smoking to 70°C
- 04:20 — Recipe: The Perfect Asian BBQ Sauce
- 05:46 — Phase 2: The Texas Crutch (Wrapping)
- 06:48 — Testing for Tenderness & The Probe Check
- 07:30 — The Glaze: Brushing & The 10-Minute Rest
- 08:38 — Summary: Why This Method Wins
