Roel holding a sliced beef rib showing bark, a pink smoke ring and the cooked beef

Foil Boat Beef Ribs on a Kamado: Bark and Tenderness

Roel Westra

A kamado can make beautifully tender beef ribs. The challenge is keeping the outside interesting while the fat renders and the meat softens. In this cook, Roel uses direct charcoal heat first, then an open foil boat on the Monolith Avantgarde. The top stays exposed right through the finish.

What does a foil boat do for beef ribs? It wraps the underside and lower sides while leaving the top uncovered. In Roel’s test, that gave the ribs some protection from the heat below and held the melted beef tallow, while the exposed top continued developing bark.

PitmasterX Texas seasoning applied over the Beef seasoning layer on the beef ribs
Beef seasoning first, then Texas: the two layers used on this rack.

The cut and the direct-heat setup

Roel calls the large rack in this video Jacob’s ladder. It is a substantial bone-in piece with plenty of meat and fat, rather than a row of thin, individually cut ribs. The cut itself matters: the finished result reflects both the quality of that beef and how it was cooked.

The large raw beef rib rack Roel calls Jacob's ladder before seasoning
The large bone-in beef rib rack before seasoning and cooking.

The Monolith is set up with the grate in its highest position and no heat deflectors. Roel controls the fire with the vents and starts at around 120°C / 248°F. This is direct cooking, but at a deliberately gentle pace.

He adds no wood chunks in this test. After roughly an hour and a half, the outside has developed the mahogany colour he is looking for. That colour is his cue to change the setup.

Beef ribs developing colour above the charcoal on the Monolith Avantgarde
The first stage takes place directly above the charcoal, with the grate at its highest position.

The practical issue is what happens next. Opening the vents to raise the temperature also increases the heat coming from beneath the rack. Roel wants to push the cook forward without letting the underside take all of that extra heat.

Why the foil boat changes the cook

The foil is folded up around the ribs, with the upper surface left completely open. Roel adds slices of beef tallow to the boat, which melt as the cook continues. He then raises the barbecue to around 150°C / 302°F.

Roel folding foil around the sides of the beef ribs while keeping the top exposed
The foil covers the bottom and lower sides; the top remains exposed.

The important change is the exposure of the meat. Foil now sits between the lower part of the rack and the fire, while the upper bark remains in the cooking environment. The boat also catches fat and juices around the base. It changes how the underside cooks without enclosing the whole rack.

Foil boat versus a full wrap

A full wrap encloses the seasoned top as well as the bottom. A foil boat leaves that top open, giving its surface more time to develop while the meat finishes. That is the reason Roel chooses the boat here: he wants tenderness and an exposed bark at the same time.

This video shows one foil-boat cook. There is no second, fully wrapped rack cooking alongside it, so it does not establish a measured advantage in cooking speed or juiciness over a full wrap. What it does show clearly is the bark this setup produced.

Close view of the dark seasoned bark on the beef ribs after the foil-boat cook
The exposed top of the ribs at the end of the foil-boat cook.

The tallow has a specific role

The added beef fat melts into the bottom of the boat. It stays around the lower part of the ribs while the top remains uncovered. The method is about managing the two surfaces differently, rather than covering the whole rack in liquid.

Temperature is the checkpoint; tenderness is the decision

Roel reaches a core temperature of 92°C / 198°F, then checks how easily a probe moves into the meat. It slides in with very little resistance, and he takes the ribs off before they become so soft that the rack falls apart.

That distinction matters. The thermometer tells him where the cook is; the resistance of the meat tells him whether the texture is where he wants it. In this test, the temperature reading and the tenderness check agree.

What the timing tells us

Roel reports about 1½ hours over direct heat, followed by roughly 5 hours in the foil boat. That is around 6½ hours of cooking for this particular rack. Those are observations from this cook, rather than a fixed schedule for every size of beef rib.

The rest and the tasting result

The ribs stay in their foil boat after leaving the barbecue. Roel lets them release some heat for about 10 minutes before moving them into a cooler. He describes a two-hour rest and a total cooking-and-resting time of roughly 8½ hours.

When he slices through the centre, the rack holds together, the bark is dark and well defined, and the meat is visibly juicy. His tasting verdict is that the beef is tender and the bark has the flavour he wanted from this ceramic-grill cook.

He credits the quality of the meat, the exposed cooking time and the rest. The strongest lesson from this test is the combination: an open top for bark, a protected underside for the hotter stage, and a tenderness check before the rest.

Questions this test answers

Can you cook beef ribs directly over charcoal on a kamado?

Roel does so here with the grate high above the coals and a controlled, low fire. Direct heat describes the setup; it does not automatically mean a fast, high-heat sear.

When does he introduce the foil boat?

After approximately 1½ hours, once the outside has developed colour, and before increasing the barbecue from 120°C to 150°C. The transition is tied to the surface of the ribs as well as the elapsed time.

Does the top get wrapped later?

No. The seasoned upper surface remains open through the rest of the cook. That continued exposure is the central reason Roel uses the boat.

The equipment used in this test

Main sponsor

Monolith Avantgarde

The ceramic barbecue used for this cook. The high grate position, adjustable airflow and ability to cook without the deflectors let Roel combine a gentle direct stage with a hotter foil-boat finish.

Explore the Monolith Avantgarde

Temperature monitoring

ChefsTemp ProTemp 2 Plus

The wireless thermometer used to follow the internal temperature during the long cook. Tracking the rise in temperature makes it easier to choose when to check the ribs for tenderness.

Use code PITMASTERX for 25% off in the ChefsTemp shop.

Shop the ProTemp 2 Plus

Monolith is the main sponsor of this video. ChefsTemp also supports PitmasterX; the equipment links above are partner links.

Watch the original beef-rib test

Original video: I Tried the New Beef Rib Style Everyone’s Talking About · Published 9 July 2026.

Tested by Roel Westra

Roel is the cook behind PitmasterX. This article draws on his original beef-rib video, its transcript and frames from the cook. The temperatures, times and tasting observations describe that specific test.

For another approach to ribs, read our no-wrap gas-grill rib test. For more on bark and wrapping, explore Roel’s pulled-pork technique.

Terug naar blog