Homemade smoked beef jerky sticks in a red-and-white paper cone

Homemade Beef Jerky Two Ways in a Borniak Smoker

Roel Westra

A tiny bag of beef jerky never lasts long around here. So I made a proper batch: chewy slices of lean beef and slender snack sticks with a smooth, even bite. Both get beech smoke in the Borniak, but each has its own seasoning and texture.

Homemade smoked beef jerky sticks in a red-and-white paper cone
Homemade beef jerky sticks with brown sugar, soy sauce and Tweety BBQ Seasoning.
2 versionsSlices and sticks
BorniakSmoker
BeechSmoke wood
60°C / 140°FDrying temperature

Allow for preparation, the curing time stated on your product, a separate heating step and several hours of drying. The slices finished sooner than the sticks in the video. There is no fixed finishing time for every thickness or smoker load.

Start with lean beef and an even cut

I use mock tender, also called chuck tender, in the video. It is a lean cut with a substantial tendon through the middle, so trimming matters. Remove visible fat and tough connective tissue before weighing the meat. Work with cold beef and keep the portions you are not using in the fridge.

For the sliced version, aim for about 4 mm thickness throughout. Pieces of the same thickness dry more evenly. Lay them flat on a rack with small gaps so air can reach the edges.

Seasoned beef jerky slices spaced apart on a wire rack
Space the seasoned slices apart rather than letting them overlap.

Turn the second batch into snack sticks

Grind the lean beef and mix it until the seasonings are evenly distributed and the mixture holds together. A piping bag makes it easy to form slender sticks without casings. Cut a small opening and keep the pressure steady, giving every stick a similar thickness.

Pipe onto heat-safe silicone mats supported by trays. Keep the sticks separate from the slices throughout the cook: their thicker shape means they need their own drying time.

Piping the seasoned ground beef into even sticks on a silicone mat
A piping bag gives the ground-beef mixture a consistent shape.

Choose the cure before measuring it

Use a commercial curing product specifically intended for the type of jerky you are making. Follow its exact dose for the weight of meat and its refrigerated curing time. Curing salts have different concentrations, so one product cannot automatically replace another gram for gram. Measure with a suitable precision scale; do not estimate by spoonfuls.

The video uses colorozo curing salt. The written recipe uses product-specific curing instructions and a separate preheating step so the method is clear when using different curing products and equipment at home.

Heat first, then smoke and dry

Before drying, heat both versions to at least 71°C / 160°F inside the meat. The method below uses a covered steamer for this step. Check several pieces with a thin-tip food thermometer. The Borniak’s cabinet reading measures the air, so it does not replace checking the meat itself.

Transfer the hot meat directly to the preheated Borniak. Beech chips provide the smoke flavour; run smoke for about 30 minutes, then continue with heat and airflow at 60°C / 140°F. Leave gaps between the pieces and use the drying attachment according to your model’s instructions if you have one.

Beef jerky slices and snack sticks on separate racks in the Borniak smoker
Separate racks let you check and remove the slices and sticks at different times.

Let the texture guide the drying stage

The slices in the video finish around 2–3 hours, while the sticks take about 5–6 hours. Treat those as observations from that cook. Your batch can take longer, especially with thicker pieces or a full smoker. Cool a test piece before judging its texture: the sliced jerky should be leathery and crack when bent, with a little flexibility left.

Cool the finished jerky promptly, pack it and keep it refrigerated. This recipe is for home-prepared jerky to eat within 3–4 days or freeze in portions. Appearance and cabinet humidity do not establish that a batch is safe to store at room temperature.

Ingredients

Make both versions, or choose one and use only that ingredient list.

Sliced beef jerky

  • 930 g / 2.05 lb very lean beef, weighed after trimming
  • 2 tbsp PitmasterX Beef Seasoning
  • 2 tbsp dark brown sugar
  • Commercial curing mix intended for beef jerky: use the exact label dose for 930 g of meat

Ground-beef snack sticks

  • 2 kg / 4.4 lb very lean ground beef
  • 4 tbsp PitmasterX Tweety BBQ Seasoning
  • 4 tbsp soy sauce
  • 4 tbsp dark brown sugar
  • Commercial curing mix intended for ground-beef jerky: use the exact label dose for 2 kg of meat

For the smoker: beech wood chips suitable for the Borniak smoke generator.

How to make beef jerky two ways

  1. Trim and slice the beefKeep the beef refrigerated at 4°C / 40°F or below while working in batches. Trim away visible fat and remove the tough central tendon from the mock tender. Cut the trimmed meat into even slices about 4 mm thick. Weigh out 930 g for the sliced version.
  2. Season the slicesRead the curing-mix label before measuring. Weigh the exact dose specified for 930 g of meat using a suitable precision scale. Mix it thoroughly through the slices with 2 tbsp Beef Seasoning and 2 tbsp dark brown sugar. Cover and refrigerate for the curing time required by that product. Do not substitute a different curing salt gram for gram.
  3. Mix the ground-beef versionCombine 2 kg lean ground beef with 4 tbsp Tweety BBQ Seasoning, 4 tbsp soy sauce, 4 tbsp dark brown sugar and the exact label dose of a cure intended for ground-beef jerky. Mix until evenly seasoned and cohesive. Keep cold and follow the product’s required refrigerated curing time.
  4. Shape and arrangePipe the ground-beef mixture into evenly sized slender sticks on heat-safe silicone mats supported by trays. Arrange the beef slices on separate racks without overlapping. Leave space between every piece. Keep the two versions on separate trays so you can remove each when ready.
  5. Heat the meat before dryingFor this written version, steam the prepared slices and sticks in batches in a covered steamer, on supported heat-safe trays or racks. Heat until the centre of the thickest pieces reaches at least 71°C / 160°F. Check several pieces with a thin-tip food thermometer, inserting the probe from the side or lengthwise. Complete this heating step before transferring the meat to the smoker for drying; a smoker air-temperature reading alone does not confirm the meat temperature.
  6. Prepare the Borniak smokerPreheat the Borniak smoker to 60°C / 140°F. Load the smoke generator with beech wood chips suitable for your model and set up the racks and ventilation according to its manual. Transfer the hot, cooked meat directly to clean racks in the preheated smoker, leaving room for airflow.
  7. Add the smoke flavourRun the smoke generator for about 30 minutes, then switch off smoke production while maintaining the heat. Use the Borniak drying accessory if fitted, following its instructions, and maintain airflow so moisture can escape.
  8. Dry each batch separatelyContinue drying at 60°C / 140°F. Check the thinner slices first, starting around 2–3 hours, and expect the thicker sticks to take longer. The video’s sticks took about 5–6 hours, but thickness, load and conditions can extend this substantially. A cooled test slice should feel dry and leathery and crack when bent without snapping. Check the centre of a cooled stick too; it should not be wet or soft. These checks describe texture, not shelf stability.
  9. Cool, pack and refrigerateMove the finished jerky to clean racks and cool promptly. Pack in clean, airtight containers and refrigerate at 4°C / 40°F or below within 2 hours of finishing. For this home recipe, use within 3–4 days or freeze portions for longer storage. Do not assume the jerky is shelf-stable from its texture or the smoker’s air humidity.

Equipment

  • Borniak smoker, racks and suitable beech wood chips. A compatible drying attachment helps maintain airflow.
  • ChefsTemp instant-read thermometer, with a thin probe for checking the slices and sticks.
  • Sharp knife, chopping board, meat grinder or lean ground beef, mixing bowl, piping bag and heat-safe silicone mats.
  • Precision scales for weighing the meat and the curing mix.
  • A covered steamer with supported heat-safe trays or racks for the preheating step.

Use code PITMASTERX for 25% off at ChefsTemp.

Watch the cook

Watch on YouTube

In this video

By Roel Westra — PitmasterX. Based on the original cook, with clarified curing, heating and refrigerated-storage instructions.

Terug naar blog